Sectional & Lounge Sofas
Hardwood frames, eight-way hand-tied springs and fabrics that survive kids, cats and coffee.
See sofa options
Muar workshop · since 2009
Furniture cut to your measurements, not the other way around
Sofas, dining sets, beds and full café fit-outs, built from kiln-dried Malaysian hardwood by the joiners of Muar — the town that furnishes the country.
17years at the bench
2,600+pieces delivered
60+cafés & offices fitted out
5-yearjoinery warranty
What we make
Five workshops under one roof
Frame-making, upholstery, finishing, metalwork and installation all happen on one floor in Bukit Pasir — so nothing about your piece is outsourced or out of our sight.
Dining Sets
Tables sized to your room and your family, with chairs and benches built to match — down to the last centimetre.
See dining options
Beds & Headboards
Platform beds, storage beds and upholstered headboards that fit odd corners and non-standard mattresses.
See bedroom options
Consoles & Sideboards
Media consoles, sideboards and display cabinets with rattan, fluted or solid panel doors.
See storage options
Café & Office Furniture
Banquettes, counters, tables and reception desks built for commercial wear — delivered on your opening schedule.
See commercial workSomething that fits nothing above?
Window benches, altar cabinets, kennel consoles, awkward alcoves — if it is made of wood and fabric, we have probably built one. Tell us what you need.
Describe your piece
Why Coachgear
Built the slow way, so it lasts the long way
Muar produces most of the furniture Malaysia sits on. We grew up in that trade, and we kept the parts of it worth keeping: proper joinery instead of staples, timber dried to the tropics instead of imported flat-pack, and one team responsible from first sketch to final polish.
- Kiln-dried hardwood, moisture-tested below 12% before cutting
- Mortise-and-tenon and dovetail joinery — no staples, no shortcuts
- In-house upholstery bench with 200+ fabric and leather options
- Our own delivery crew assembles and levels every piece on site
How a commission works
From measurement to installation in four honest steps
Talk & measure
Send us your room dimensions, photos or a floor plan — or visit the Muar showfloor. We listen first and advise on what will actually fit and wear well.
Design & quote
You receive a dimensioned sketch, timber and fabric samples, and a fixed written quote. Nothing is built until you have approved every line of it.
Build & inspect
Your piece is cut, joined, upholstered and finished on our floor. We send progress photos, and you are welcome to inspect it in person before it ships.
Deliver & settle in
Our crew delivers, assembles and levels everything, then walks you through care. The balance is only due once you are satisfied.
Recent commissions
Spaces we have furnished lately
Heritage shophouse café, Muar
Fourteen tables, banquette seating and a service counter for a 1920s shophouse on Jalan Abdullah.
View this project
Condominium living floor, Kuala Lumpur
A full living-dining set scaled for a 900 sq ft unit in Mont Kiara — sofa, table, console and armchair.
View this project
Corporate lobby, Johor Bahru
A six-metre reception counter, slat feature wall and bench seating for a plantation group's headquarters.
View this project
Word of mouth
What clients say when the dust settles
The dining table is the exact length I asked for and the bench tucks under it completely. Two years of daily use and not a single wobble.
They fitted our whole café in nine weeks and hit the opening date. The banquettes still look new after a year of full houses.
I sent a rough pencil sketch of a console for a strange corner. What came back was better than what I imagined, and it fit to the millimetre.
Before you ask
Questions we hear on the showfloor
Most single pieces — a sofa, a dining table, a bed frame — leave our Muar workshop within 5 to 7 weeks of the deposit. Full home or cafe fit-outs are usually scheduled over 8 to 12 weeks, and we confirm a delivery window in writing before any work begins.
Yes. Our own crew delivers and installs throughout Johor, Melaka, Kuala Lumpur, Selangor and Penang, and we arrange insured transport to Sabah and Sarawak through partners we have used for years. Delivery within 30km of Muar is free.
Mainly kiln-dried Malaysian teak, nyatoh, merbau and rubberwood, plus American walnut and oak on request. Every board is moisture-tested to below 12% before it is cut, which is what keeps joints tight through our humid seasons.
We can build to a photo, a sketch or a floor plan — but we never produce straight copies of another maker's protected design. Our designers will rework the proportions, joinery and finish so the piece is buildable, durable and genuinely yours.
Every piece carries a 5-year structural warranty on frames and joinery, and 2 years on upholstery workmanship. If a joint loosens or a weld in a metal base fails under normal home use, we repair or replace it at no cost.
Our showfloor sits beside the workshop in Kawasan Perindustrian Bukit Pasir, Muar. You can walk the floor, test the seating and see pieces at every stage of production. We are open Monday to Saturday, 9:00am to 6:00pm — no appointment needed.
A 50% deposit confirms your slot and locks in the quoted price. The balance is due only after you have inspected the finished piece — at the workshop or on delivery — and are happy with it. We accept bank transfer, FPX and major cards.
Measure your room. We will make the rest.
Send us your dimensions and a photo of the space — you will have a considered reply, with honest pricing, within one working day.
Get a quote in 24 hours